How To Keep A Water Heater In Great Shape


article-new_ehow_images_a04_i8_vu_gas-water-heater-pilot-light-800x800Did you know that a water heater makes up 15-25 percent of your energy costs? If you want to reduce your energy bill, replacing your water heater is a great place to start. New water heaters consume less energy. There are other options you can use such as installing a tankless water heater. The costs of a new water heater can concern homeowners as it costs at least $800 or more to have a 40-gallon water heater installed. If you want to save your money, you need to perform routine maintenance on your water heater. Keeping your water heater in great shape is easy to do with the following tips.

Tip # 1 Clean Sediment

A water heater is filled with tap water, which can cause a sediment build-up over time. The bottom of your water heater could be covered with several inches of sediment. This forces the water heater to work harder to keep the water warm. Each year, you need to flush your water heater to prevent this build-up from occurring. To clean the sediment, drain the water out of your water heater. Fill it half-way up with water and flush this again. Now, fill up your water heater. Turn on different faucets and you may notice the water initially comes out brown for a few seconds. This shows you that you had a sediment build-up in your water heater and water lines.

Tip # 2 Heat Wrap

To prevent the water heater from consuming excess energy, use an insulation blanket. This will help the water heater to preserve the hot water inside. A water heater will not work as hard to keep the water warm and it will stay warm for a longer period of time.

Tip # 3 Adjust the Temperature

If your water heater is set to a high temperature, it can force the system to go out quickly. You need to keep the temperature below 120 degrees. If the water is at a high temperature, it can lead to over-heating. If you store materials around the hot water tank, it could cause a fire. A hot water tank needs to have plenty of room to “breathe”. Keep flammable materials away from the water tank. You also need to clear out boxes and other debris from being within 5-10 feet of the water heater.

Tip # 4 Professional Servicing

Hire professionals to test your hot water heater. They will clean the sediment, adjust the temperature, and test the system for other problems. A hot water heater should last about 10-15 years. If your tank is older, have the company test for leaks. You need to replace the water heater if it is starting to age as it can easily lead to serious flooding.

Tip # 5 Replace the Water Heater

If you need to replace your water heater, search local stores to find the best pricing. Most water tanks will cost $600 or more. Replacing them without professional installation companies can save you a lot of money, but you run the risk of installation problems. Some water heaters will need to be brought up to code. If you have a system that is older, you likely do not have a reserve tank in place. These are used for earthquakes and other issues. An earthquake strap will be placed around the water heater along with a drip pan. You will need to have a variety of tools from a hammer to screwdrivers to install a water heater. If you need to replace any broken pieces on your electric screwdriver and other tools, you can find DeWalt parts here: http://www.ereplacementparts.com/dewalt-parts-c-1009.html.

Caring for your home’s water heater will prevent flooding, fires, and other problems. Take the time to service your water heater each year. This will extend the lifespan of your water tank, giving you hot water for years to come!

Be Sociable, Share!

Leave A Comment...

*